Resiblock Resiecco

Wet-cast concrete products (Low porosity materials) & light to medium loads

Resiecco is a solvent-free sealant and joint stabilizer. This product is an ideal paving sealant for simulated stone (wet cast concrete paving) such as SmartStone and Terrazzo. Resiblock Resiecco stabilises jointing sand and provides excellent stain resistance to the surface of a paver. Unlike cheap sealants, Resiblock Resiecco penetrates the paver for lasting protection. Ideally suitable for pedestrian traffic such as walkways and patios. Resiblock Resiecco may also be used for residential driveways.

Also available in a 25L – Enquire here

Coverage when stabilising joints:
± 3m² / L

When sealing on pavers and joints only, please take note of the following:
Smooth pavers: 6m² per litre
Textured pavers: 4m² per litre



Resiblock Resiecco is the recommended paving sealant for simulated stone paving (wet-cast concrete paving). This solvent free paving sealer for sensitive areas, Resiblock Resiecco will stabilise the jointing sand and provide excellent stain resistance to the surface of the paver. Paving sealant suitable for pedestrian traffic.

Please Note – It is advised with new projects to ensure paving is sealed with RESIBLOCK ’22’ simultaneously with pavement construction, on a daily basis. DO NOT WAIT until the project is complete.

  1. Make sure the surface and jointing sand are thoroughly dry and free from dirt.
  2. Ensure that Resiblock Resiecco is applied when there is no risk of rain within the next 24 hours.
  3. Do not apply in extremes of temperature (below 5oC or above 30oC).
  4. Ensure paving is thoroughly swept and that no jointing sand remains in the chamfers of the pavers.
  5. Stir contents well.
  6. Apply to surface using a watering can (with the rose attached) and remove ALL surplus with a squeegee.
  7. Accurate application rates are essential to ensure full joint stabilisation e.g., 100 x 200mm CBP 2m²/litre. For other dimensions, please don’t hesitate to contact us for assistance.
  8. Avoid walking on the sealed area for 2-4 hours after application and do not drive